Welcome to A. Beattie Engineering Services

WE DESIGN, ENGINEER AND DELIVER

Manufacture of component parts

Stainless steel fabrications

Aluminium fabrications

 

Structural steel fabrications

Sheet metal fabrications

Mild steel fabrications

 

On-site welding and fabrication

Process pipe fabrications

Consultancy and design

 

Plant shifting and installations

Mechanical maintenance

MIG, TIG and MMA welding

 

About us

Established in 1998 and based in Aberdeenshire, we have built our reputation through reliability, quality and competitiveness. This reputation has secured us a broad scope of engineering projects across a wide range of business sectors.

 

The combination of a friendly professional service and the ability to meet tight deadlines has helped up to build up a large customer base. 

 

It has also enabled us to attract business from a wide geographical area therefore allowing us to expand our capacity and facilities. Our areas of expertise include servicing the onshore and offshore industries.

 

At A Beattie Engineering, we pride ourselves in taking ownership of your requirements from the first contact to the full execution of your project. Fuss free discussion and understanding of your needs through to detailed design and discussion on site followed up by a safe and rapid execution Minimal impact on your sites operations until the full commissioning of your new asset saving loss of production and revenue. A Beattie Engineering do all of this at a quote that might surprise you and a final cost that won’t. We utilise the latest techniques, optimised planning and procurement and only the finest qualified engineers and fabricators in the business.

Our Work

Our services

design

We specialise in the design, fabrication and installation of stainless steel, aluminium and steel structures.

engineer

Items range from computer workstations to a full size helideck, complete with helicopter for training purposes.

deliver

We arrange for the transportaion and installation, including making arrangements for heavy lifting equipment, if required.

Testimonials

Colin Leyden

Managing Director, Falck Safety Services UK

Falck Safety Services UK (FSSUK) have a long standing relationship with A. Beattie Engineering, formed over many years. Delivering design, development, manufacturing, maintenance and project management expertise in relation to our training assets, we’ve built up a close and trusting relationship.  Across all four of our UK training centres, our training assets are integral to the success of the business, ensuring we are the lead provider of training for our target markets. Supported by A. Beattie Engineering, our business goal is to continue to deliver the most realistic and comprehensive training environment for our clients, maximising the learning and competence levels of all our delegates.

 

From initial consultation through to project planning, delivery and execution, A. Beattie Engineering provides a wealth of experience and expertise advising on key financial and development stages, completing all projects on time and on budget. This ensures we meet market demand and deliver industry leading, bespoke training specifically for our clients both locally and internationally.  Recent joint projects have included helicopter simulators, helideck training platforms, offshore wind towers, METS cranes, bespoke rigging frames and most recently the new fire training asset based at the Fire Training Group. (read more here).

 

A.Beattie Engineering invests in knowledge and skills that are relevant to our business and understand the importance of our core company values, all of which underpin our attitude to safety and safety training. We look forward to working with A. Beattie Engineering on many more projects.

 

MARTIN STUBBS

Aberdeen International Airport Limited

A. Beattie Engineering provide bespoke engineering solutions and have provided ourselves with innovative solutions to our training and engineering needs. The company works with us to ensure that we achieve the most cost effective solution to our requirements, always within agreed timescales and to the highest quality.

 

Daniel Shepherd

Schlumberger Oilphase Product Center

We have used A. Beattie Engineering Services for many years over a number of different projects. He always comes up with a solution for the problems we have in our manufacturing facility. I consistently find the work to be of the highest of standards. Andy’s friendly and professional attitude means he is my ‘go to guy’ for bespoke engineering projects.

 

Steve Shearman

Wireline Region Manager, Archer

The mandate issued to A Beattie Engineering Services was to assist with the development, design and to ultimately fabricate an onshore testing facility. The objective of this facility was to simulate various oil and gas well completion configurations, thus facilitating a cost effective way for Archer to demonstrate the capability of their unique ultrasound imaging and behind pipe leak detection technology.

 

Throughout the entire process A Beattie Engineering Services has made recommendations demonstrating foof solution. This has cumulated in the safe delivery of a testing facility that was delivered, commissioned and operational as scheduled, within budget.resight, attention to detail and assisted the team to develop a flexible and future pro Beyond the commissioning of this equipment, Archer have continued to enjoy the benefits of continued support and development input from A Beattie Engineering Services , thus allowing the testing facility to deliver beyond our original expectations. The professional and objective approach demonstrated by A Beattie Engineering Services leads me to have no hesitation to employ their services in the future.

 

Nikki Tierney

Innovation Hub Manager, The Oil & Gas Technology Centre

The Innovation Hub is a state-of-the-art facility to drive innovation and accelerate new technologies to help unlock the full potential of the UK North Sea.

 

As part of our Open Innovation Programme we exhibit emerging technologies and we needed a safe and reliable method to get exhibits in and out of our head office building.  A Beattie Engineering Ltd conceptualised, designed and installed a scissor lift to meet this requirement.  We found A Beattie Engineering Ltd very quickly understood what we were trying to achieve and worked proactively with us to develop a safe and cost effective solution.  We also found them flexible in delivery, working alongside our main contractors and providing support where needed.  During and after install they ensured the lift was operating safely, advising on best operating practice for our Hub team.

 

At our first major exhibitor event, Robotics Week, we had a number of large, unique and very specialised items on display.  Without exception, our exhibitors have complimented us on how easy it has been to safely and securely install their robotics.

 

Simon Burkitt

Project Manager, New Dunker Facility RNAS Yeovilton

Royal Naval Air Station (RNAS) Yeovilton has opened a world leading, first of its kind in the UK, facility to provide survival training in the event of a helicopter incident or accident over the water.

 

GallifordTry were challenged with a tight programme to deliver the facility, this was passed on to our supply chain. Essential to the operation of the facility was the Survival Systems Ltd (SSL) crane which was to be installed by A Beattie Engineering Ltd. Through initial consultation with them, we discovered their expertise could provide an offsite fabrication and transportation solution which allowed the crane to be installed in one lift, early to the main programme and in a significantly reduced timescale. cA very professional and customer facing service with a broad knowledge, providing an optimized solution, with a trouble-free installs.

 

Garry Marsden

Visitor Enterprise Manager, Balmoral Estate

At Balmoral we were looking for a solution to old heater grills that had become unsightly and unsafe. There did not seem to be an off the shelf solution. I was given Andy Beattie's contact. Andy was quick to come up with a solution that was both affordable and effective. The job was completed quickly with all parts manufactured and installed by Andy himself. The result speaks for itself and I would have no hesitation in recommending Andy to you for similar projects.

 

Bill Dean

Managing Director, Deans of Huntly

Here at Deans Bakery we have a wide range of plant in our manufacturing operations here in Huntly, a good number of which have been made bespoke to our own particular specifications and requirements.

 

sOn numerous occasions, Deans Bakery has enlisted the highly skilled services of A Beattie Engineering Ltd whenever equipment has failed or indeed is failing. Often enough, the manufacturers of the plant equipment are not able to sort and repair our equipment and we call on the services of A Beattie Engineering Ltd.

 

With the complexity of equipment that we have, when it fails our first port of call is always A Beattie Engineering Ltd. They have an abundance of knowledge across a broad spectrum of processing equipment, beyond that they have excellent contacts in their respective fields who can assist wherever required.

 

A Beattie Engineering Ltd are dedicated to problem solving and immerse themselves in whatever is required to problem solve and ensure we are back up and running.

 

We recently had reason to call on A Beattie Engineering Ltd for the repair and redesign of working components on an automated cutting line. We had resigned ourselves to the fact that we had a significant Capital Expenditure project (CAPEX) coming at us for a replacement unit. Thankfully A Beattie Engineering Ltd solved a number of design flaws for us, they worked through complex gearing and timing issues and upgraded weak structural areas on the original equipment.

 

The cutter has never performed to the levels it does now and is smoother than ever, drastically improving product wastage as an aside. We are now confident that it will serve our needs well for many years to come. I have absolutely no hesitation in recommending A Beattie Engineering Ltd.

 

Mike Whigham

Senior Coating Engineer, TechnipFMC

A Beattie Engineering has been providing fabrication services to us over the last year with our internal R&D programs. Although all the items specialised with non-standard materials with extremely tight deadlines, A Beattie Engineer provided critical review with regards to the methods of fabrication as well as several points throughout construction to review the items mid-fabrication to allow opportunity for revision. This ensured to us that the items arrived not only on time but that they were fit for purpose and could be sent directly into service which was paramount to, not only this project, but all our future projects success.

 

David A O’Neill

Head of The Fire Training Group

We have worked with A Beattie Engineering Ltd over the past 17 years and have been delighted with the level of personal service and attention to detail that has been provided.

 

As a leading provider of emergency response training in the UK, we provide training scenarios that allow delegates from industries including offshore, aviation and maritime to develop their emergency response skills. Key to this, is the design, delivery and maintenance of training rigs that facilitate training in a safe and realistic environment.

 

A Beattie Engineering Ltd have worked proactively with us to deliver solutions that meet our requirements, which have been both cost efficient and delivered to tight time lines.

 

Work includes the installation of a large multi scenario simulator and the rebuild of both a Cessna light aircraft and a Jaguar GR3 military aircraft.

 

Our most recent project was the design and construction of our extensive confined space training unit which continually receives positive feedback from clients.

 

Bill Jodry

Project Planning, Survival SYstems Ltd

Survival Systems Limited (SSL) of Canada is the authentic original equipment manufacturer of the Modular Egress Training Simulator (METS@) used in delivering life-saving egress training. SSL is sought out globally by engineering and architectural groups for advice on designing water survival training facilities.

 

As part of SSL's complete turnkey training solution deliveries, we have engaged the services of A Beattie Engineering Ltd since 2010.

 

Andy has performed various services for SSL related to our Personnel-Rated Lift Systems including installations, emergency after sales service, design for bridge and gantry systems together with fabrication for bridge and gantry systems.

 

In all our dealings with Andy, we have found him to be very professional, courteous, and a true pleasure to work with.

 

Having engaged many engineering and steel fabrication companies around the world we can say without reservation our experience and the work product outcome Andy delivers has been unsurpassed, on time, and within budget.

 

We have found Andy to be more than competent in thought and action, so much so that A Beattie Engineering Ltd is now the only company that we have authorized as a service representative for Survival Systems Limited's Personnel Rated Lift Systems.

 

We at Survival Systems Limited look forward to many more years of building on our great working relationship with Andy to continue to enhance and preserve workers' lives!

Contact Us

A Beattie Engineering Services

Milton Cottage, Moss of Letter, Lyne of Skene,

Aberdeenshire, AB32 7EQ

 

Telephone: 01330 860850

Mobile: 07801 053 547

E-mail: info@abeattie.co.uk

 

VAT Number: 735 3183 38

Contact Form

Please enter your name.

Please enter your subject.

Please enter your message.

Your message has been sent successfully.

Sorry, error occured this time sending your message.